{
  "$schema": "https://apidocs.iqrf.org/iqrf-gateway-daemon/latest/com.iqrftech.self-desc/schema/jsonschema/1-0-0#",
  "self": {
    "vendor": "com.iqrftech.self-desc",
    "name": "iqmeshNetwork_ReadTrConf-response",
    "format": "jsonschema",
    "version": "1-0-0"
  },
  "type": "object",
  "properties": {
    "mType": {
      "type": "string",
      "description": "IQMESH Network management - Read TR configuration response.",
      "enum": [
        "iqmeshNetwork_ReadTrConf"
      ]
    },
    "data": {
      "type": "object",
      "properties": {
        "msgId": {
          "type": "string",
          "description": "Message identification for binding request with response."
        },
        "rsp": {
          "type": "object",
          "description": "Returns following values, see its description.",
          "properties": {
            "deviceAddr": {
              "type": "integer",
              "description": "Device address to read the configuration from."
            },
            "embPers": {
              "type": "object",
              "description": "Embedded peripherals enabled on the node.",
              "properties": {
                "values": {
                  "type": "array",
                  "description": "An array of 32 bits. Each bit enables/disables one of the embedded 32 predefined peripherals.",
                  "items": {
                    "type": "integer"
                  },
                  "maxItems": 4
                },
                "coordinator": {
                  "type": "boolean",
                  "description": "If coordinator is enabled."
                },
                "node": {
                  "type": "boolean",
                  "description": "If node is enabled."
                },
                "os": {
                  "type": "boolean",
                  "description": "If OS is enabled."
                },
                "eeprom": {
                  "type": "boolean",
                  "description": "If EEPROM is enabled."
                },
                "eeeprom": {
                  "type": "boolean",
                  "description": "If EEEPROM is enabled."
                },
                "ram": {
                  "type": "boolean",
                  "description": "If RAM is enabled."
                },
                "ledr": {
                  "type": "boolean",
                  "description": "If LEDR is enabled."
                },
                "ledg": {
                  "type": "boolean",
                  "description": "If LEDG is enabled."
                },
                "spi": {
                  "type": "boolean",
                  "description": "If SPI is enabled."
                },
                "io": {
                  "type": "boolean",
                  "description": "If IO is enabled."
                },
                "thermometer": {
                  "type": "boolean",
                  "description": "If thermometer is enabled."
                },
                "pwm": {
                  "type": "boolean",
                  "description": "If PWM is enabled."
                },
                "uart": {
                  "type": "boolean",
                  "description": "If UART is enabled."
                },
                "frc": {
                  "type": "boolean",
                  "description": "If FRC is enabled."
                }
              }
            },
            "rfBand": {
              "type": "string",
              "description": "Used RF band."
            },
            "rfChannelA": {
              "type": "integer",
              "description": "Main RF channel A of the main network. Valid numbers depend on used RF band."
            },
            "rfChannelB": {
              "type": "integer",
              "description": "Same as above but second B channel. Used at RFPGM only."
            },
            "rfSubChannelA": {
              "type": "integer",
              "description": "Main RF channel A of the optional subordinate network in case the node also plays a role of the coordinator of such network. Valid numbers depend on used RF band. Available for DPA<400."
            },
            "rfSubChannelB": {
              "type": "integer",
              "description": "Same as above but second B channel."
            },
            "txPower": {
              "type": "integer",
              "description": "RF output power. Valid numbers 0-7."
            },
            "rxFilter": {
              "type": "integer",
              "description": "RF signal filter. Valid numbers 0-64."
            },
            "lpRxTimeout": {
              "type": "integer",
              "description": "Timeout for receiving RF packets at LP mode at N device."
            },
            "rfAltDsmChannel": {
              "type": "integer",
              "description": "A nonzero value specifies an alternative DPA service mode channel."
            },
            "rfPgmEnableAfterReset": {
              "type": "boolean",
              "description": "If sets, then activates RFPGM invoking by TR module reset."
            },
            "rfPgmTerminateAfter1Min": {
              "type": "boolean",
              "description": "If sets, then terminates RFPGM automatically ~1 minute after reset."
            },
            "rfPgmTerminateMcuPin": {
              "type": "boolean",
              "description": "If sets, then terminates RFPGM by dedicated pin of the TR module."
            },
            "rfPgmDualChannel": {
              "type": "boolean",
              "description": "If sets, then enables single or dual channel function."
            },
            "rfPgmLpMode": {
              "type": "boolean",
              "description": "RFPGM receiving mode setting. If set, then LP (low power) Rx mode is used during RFPGM. Otherwise STD (standard) Rx mode is used."
            },
            "rfPgmIncorrectUpload": {
              "type": "boolean",
              "description": "Read only. Indicates that the last RFPGM has successfully been completed."
            },
            "customDpaHandler": {
              "type": "boolean",
              "description": "If set, then a Custom DPA handler is called in case of an event."
            },
            "dpaPeerToPeer": {
              "type": "boolean",
              "description": "If set, then DP2P is enabled at [N]."
            },
            "nodeDpaInterface": {
              "type": "boolean",
              "description": "If set, then Node device can be controlled by a SPI or UART interface. Valid only in DPA version < 4.00"
            },
            "uartBaudrate": {
              "type": "integer",
              "description": "Baud rate of the UART interface if one is used."
            },
            "localFrcReception": {
              "type": "boolean",
              "description": "If set, then Local FRC reception is enabled at [N]."
            },
            "dpaAutoexec": {
              "type": "boolean",
              "description": "If set, then DPA Autoexec is run at a later stage of the module boot time."
            },
            "routingOff": {
              "type": "boolean",
              "description": "If set, then the Node device does not route packets on the background."
            },
            "ioSetup": {
              "type": "boolean",
              "description": "If set, then DPA IO Setup is run at an early stage of the module boot time."
            },
            "peerToPeer": {
              "type": "boolean",
              "description": "If set, then device receives also peer-to-peer (non-networking) packets and raises PeerToPeer event."
            },
            "neverSleep": {
              "type": "boolean",
              "description": "If set, then unbonded Node using default IQRF buttons never sleeps during the button bonding. From DPA v3.03"
            },
            "stdAndLpNetwork": {
              "type": "boolean",
              "description": "If the bit is set, then the [C] controls the STD+LP network; otherwise, it controls the STD network. The bit can only be changed if the network is empty (no [Ns] are bonded) otherwise the network will stop working. From DPA v4.00"
            }
          },
          "required": [
            "deviceAddr"
          ]
        },
        "raw": {
          "type": "array",
          "description": "Returns array of objects req-cnf-rsp, see its description.",
          "items": {
            "type": "object",
            "properties": {
              "request": {
                "type": "string",
                "description": "Binary buffer with DPA request."
              },
              "requestTs": {
                "type": "string",
                "description": "YYYY-MM-DDTHH:MM:SS.SSS±HH:MM"
              },
              "confirmation": {
                "type": "string",
                "description": "Binary buffer with DPA confirmation."
              },
              "confirmationTs": {
                "type": "string",
                "description": "YYYY-MM-DDTHH:MM:SS.SSS±HH:MM"
              },
              "response": {
                "type": "string",
                "description": "Binary buffer with DPA response."
              },
              "responseTs": {
                "type": "string",
                "description": "YYYY-MM-DDTHH:MM:SS.SSS±HH:MM"
              }
            },
            "required": [
              "request",
              "requestTs",
              "confirmation",
              "confirmationTs",
              "response",
              "responseTs"
            ]
          }
        },
        "insId": {
          "type": "string",
          "description": "IQRF GW daemon instance identification."
        },
        "status": {
          "type": "integer",
          "description": "IQRF GW daemon API (general or mType) status."
        },
        "statusStr": {
          "type": "string",
          "description": "IQRF GW daemon API (general or mType) status in string form."
        }
      },
      "required": [
        "msgId",
        "status"
      ]
    }
  },
  "required": [
    "mType",
    "data"
  ]
}